I’m in an apt. and the power has been shutting off lately. It doesn’t trip any of the breakers in the breaker box inside the apt. but it does trip the master breaker on the box outside. Thought it was an oven issue but it still happens with the oven breaker off.
Visual inspection of the breaker box outside shows one of the wires looks a bit corroded. Wires to/from the rest of the units are a nice copper color. Is that a red flag?
Landlord is dragging their feet and telling us to talk to the electric company, and electric company is saying to call a licensed electrician, so I’m just trying to understand the issue so hopefully the landlord will listen to me.
Electrician here, that’s heat scoring. Happens when the terminal is loose, or the draw is nearing the upper limit of the installed wire for an extended period of time (looks like #8 TW, which is not ideal to run at 50a for more than 3 hours continuously, especially for how old it is). It could also be that the breaker is old enough to not be tripping reliably. Either way, there’s enough resistance with that scoring that I’ll just keep getting worse and continually building up heat until it melts the breaker and/or burns off. An electrician needs to swap that breaker and re-pull the wire (with #6s), that’s not a utility issue.
I assume you are talking about the middle wire?
No, the wire in the bottom terminal that’s blackened
But that’s green copper oxidation
Cause by heat scoring, and beneath the traces of green oxidation is heat blackenng. That leg specifically has been over heated over time, causing the discoloration reaction. If it was natural oxidation (like the statue of liberty, for example), then all the wires would be the same color.
Copper wire for a long time has been manufactured in such a way that it is resistant to ambient oxidation. When excessive heat is induced in the wire, that natural protection is broken down and then it is subject to turning green, but generally only where heat has damaged the wire.
Here is a basic idea of how cables are made to not oxidize when they’re just sitt ng there in normal operation.
Damn, thank you for explaining, I appreciate it.
No worries
Not here to directly answer your question, but to recommend that you do an internet search for the name of your location and the phrase rent escrow.
It seems like you could have a somewhat dangerous situation on your hands and escrow is a way to legally withhold your rent until that issue is resolved.
Also, even as a non-electrician that situation looks kind of gnarly and definitely needs to be looked at by an electrician on site. The symptoms alone are definitely concerning.
Best of luck, friend.
Also save your emails and texts. Avoid calls unless your location allows single party consent to record (and test it out on your phone).
Does that 50amp breaker serve your whole apartment? And then you have a sub panel with a bunch of circuits of 15amp breakers and maybe a dryer or oven 30-40 amp breaker? Most likely the various things you have plugged in, plus oven are not tripping their own circuit, but overall total draw is more than 50 amps the main can handle
Yeah that one feeds my 1 bedroom apt. This is the inside panel. The oven one takes up two slots that are tied together then 3 smaller circuits for the two rooms (including fridge) and lights. No washer, dryer, air, water heater, or heater involved.
It would be the landlord needing to call an electrician in, nothing to do with the electric company (at this stage). Here if a landlord is failing to act we can call in a professional and withold the service fee from the rent.
The inner panel with the oven and other 3 circuits has a total of 100amps, compared to the outside panel only handling 50amps. So you could run enough stuff that wouldn’t trip the inner panel, but the outside is overloaded.
But it doesn’t preclude a short or some other situation either, like a faulty breaker inside, that should be tripping but isn’t.
For safety you need to have an electrician come in.
When does it trip? What things are running when it happens?
We’ve managed to trigger the main to flip 4 times—none on purpose.
First the main oven was clearly the trigger leading me to suspect a bad heating element.
Second one was the same scenario.
Third one was a single burner on the stovetop (no oven).
Then I turned off the oven breaker inside assuming oven needed repair.
Fourth time no kitchen appliances being actively used and stove/oven breaker is off. The items being actively used were the fridge, two medium sized tv monitors, an xbox one x, and a pc tower. Each setup plugged into a different circuit. I remember commenting that the xbox sounded like it was working hard soon before the outage. Xbox and one monitor were on one circuit and PC and the other monitor on the another circuit.
So yeah it does sound like we’re managing to trip the main breaker without tripping any of the sub panel breakers by running enough devices at once even if they’re on different circuits in the apt.
we’ve lived here a long time so the fact that this is and issue now and wasn’t in the past points to some element deteriorating whether it be circuitry itself or one of our devices. If one of the devices had a full short the inside breaker should trip? But maybe another malfunction that doesn’t quite amount to a short?
A PC and an Xbox shouldn’t combine to overload 50A, especially when they’re protected by a 15 and 20A breaker respectively (not enough to overload 50) so something is definitely not right.
Yeah it could be a faulty main breaker then
What you’re describing is not an issue caused by corrosion on a wire. Corrosion won’t cause overdraw or shorting, so it wouldn’t cause your main breaker to flip.
It’s more likely that you either have a weakening breaker due to age tripping at a lower draw than it was originally rated for or you’re drawing more across the entire system than the main is rated for.
The electric co does not handle anything from the first breaker on and nothing on their end would trip your breaker(it would trip something of theirs upstream), usually so they are right that you should be talking to an electrician. That is something that your landlord should be on the hook for, barring any previous agreements.
If you want to see what your circuits are drawing, consider picking up a digital clamp meter, they will make it possible to see what each circuit, including the main are actually drawing.
Electrical Engineer here, that corrosion doesn’t look too bad, I wouldn’t assume it’s the issue but it’s not impossible it might be a contributing factor since corrosion on connections can cause heat and heat can trip breakers.
If the breaker trips are happening when you do something like turn on the oven or the toaster then it’s just a matter of the electric service to the house being too small for the apartments loads. This can happen if the apartment originally had gas appliances that were later switched to electric or something else (like a hot tub) was later added to increase the electric load beyond what was originally designed for.
If the trips dont seem to correspond to anything you’re doing with electric appliances, then the equipment may be going bad or there may be an intermittent short. Both of which are not something you would be able to troubleshoot (and frankly, if you don’t know what you’re doing, even opening up a panelboard like you’ve done can be deadly).
Either way I highly recommend you either pressure your landlord to bring in an electrician, or pay for one out of pocket if thats not an option.
I definitely won’t make a go of it myself, don’t worry! They also recently moved the sub-panel from inside a closet to a more accessible wall to bring the building up to fire code or something so I wonder if something could be loose from that process. I’ve lived here several years and didn’t even know the unit had a main breaker outside until this year when someone from the electrical company showed me how to reset it.
Corrosion is definitely a red flag, but that looks like just surface corrosion. Just from the picture, it doesn’t look deep, but it would need to be removed from the breaker and inspected to be sure.
If the issue is “downstream” of the meter, then it’s 100% the property owner’s problem. Unfortunately, the only options you have are to hire an electrician yourself or keep prodding your landlord until they take responsibility.
Some places allow for rent escrow which basically holds your rent hostage until they fix the problem. It’s a legal way to get things fixed.
